2 diffrent port mappings
a little progress this time: the IP cam still works! And this time i could see the applet on the laptop with error: need chk host signed applet.
I did put the public adress then it says: Url will be: 145.....:8081 or
10.x.x.151:8081/local.html
Do I probably have to change this 10 number in the streamfolder in the template?
I did put the public adress then it says: Url will be: 145.....:8081 or
10.x.x.151:8081/local.html
Do I probably have to change this 10 number in the streamfolder in the template?
No, the template file contains variables for thoose values. So you don't need to change them there. Yawcam will replace the variables with the real values entered in the settings.
But If you already have chaged the template files, and removed the varable names... this might be the problem.
How does your template file look?
/malun
But If you already have chaged the template files, and removed the varable names... this might be the problem.
How does your template file look?
/malun
It should look like this:
/malun
Code: Select all
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>Yawcam</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>
<div align="center">
<p><strong><font size="5" face="Verdana, Arial, Helvetica, sans-serif">@HEADING</font></strong> </p>
<p>
<APPLET CODE=YawApplet.class WIDTH="@WIDTH" HEIGHT="@HEIGHT">
<param name="Host" value="@HOST">
<param name="Port" value="@PORT">
</APPLET>
</p>
<p><a href="http://www.yawcam.com" target="_blank"> <font face="Verdana, Arial, Helvetica, sans-serif">www.yawcam.com</font></a></p>
</div>
</body>
</html>
There was some errors in the template file. The varialbe names had been replaced with real values in the template file. Then Yawcam will not be able to replace the values with real valeus when it generates the real file. Please try again with the new template file i emailed you. (That file contain exactly the same html code I posted above)
/malun
/malun