Hello. I'm trying to connect a Smartvue S9C1 to Yawcam. Everything looks correct, other than the software doesn't find the camera.
When I go to the "Am I Online" link, both lines say everything is ok.
Here's what I've tried:
- detecting the camera, but nothing is found.
- entering the IP addresses that appear on the "Am I online" page, but nothing is ever found.
- entering the IP address of the camera, but nothing is found.
- entering the ip address of the camera with both port numbers at the end, but nothing is found.
Here's the log it creates when I start it.
[29/2 12:30] Yawcam started
[29/2 12:30] Settings loaded
[29/2 12:30] Language: English
[29/2 12:30] Http-output started
[29/2 12:30] Stream-output started
[29/2 12:30] UPNP: Found device Cisco Internet Access Server Linksys Series Router E3200
[29/2 12:30] UPNP: Found device Cisco Internet Access Server Linksys Series Router E3200
[29/2 12:30] UPNP: Port 8888/TCP mapped to xxx.xxx.x.xxx
[29/2 12:30] UPNP: Port 8081/TCP mapped to xxx.xxx.x.xxx
Any suggestions? Thanks!!
Help Detecting Camera - Think I'm close...
-
- Moderator
- Posts: 1210
- Joined: Wed Jan 14, 2009 3:50 am
Re: Help Detecting Camera - Think I'm close...
Each camera is different, you'll have to use the IP address of the camera, but the URL will also have to point directly to the camera's video stream. Typically, I search google for "<make> <model> MJPG Stream" and find the URL that way, looking for your camera and going through the manual, it looks like it only support RTSP, which Yawcam doesn't support, see: http://www.yawcam.com/forum/viewtopic.php?f=4&t=213