I am getting this error at some sites within the applet:
Err. Timed out! Usr online?
Anyone have any ideas what this is?
Thansk.
Error in applet
-
Guest
I am trying to watch my own webcam on port 80, so I leave the 80 off (although I have tried both ways).
I am using the unsigned applet?
Other people not at my site can see he stream.
I am thinking something is disabled at the site's firewall were I cannot see the stream. I can get to the site so I know the port is open on the firewall (now on port 80 that is no longer an issue).
I will try the snapshots and see what happens.
I am using the unsigned applet?
Other people not at my site can see he stream.
I am thinking something is disabled at the site's firewall were I cannot see the stream. I can get to the site so I know the port is open on the firewall (now on port 80 that is no longer an issue).
I will try the snapshots and see what happens.
Are you behind a router? And have you selected "advanced" and forced an public address in the stream settings?
If so, then you probably will have to use the internal address to your "yawcam computer" and add /local.html at the end when you try watch yourself.
Example: If I run Yawcam on port 80 at a computer with ip 192.168.0.2. Then I can watch myself on the address: http://192.168.0.2/local.html
Are my guesses correct?
/malun
If so, then you probably will have to use the internal address to your "yawcam computer" and add /local.html at the end when you try watch yourself.
Example: If I run Yawcam on port 80 at a computer with ip 192.168.0.2. Then I can watch myself on the address: http://192.168.0.2/local.html
Are my guesses correct?
/malun
-
mgb4tim
need signed applet....
on my Yawcam computer, behind my router, I was getting the 'Need signed applet' error.
On another computer behind my applet, I was getting the stream on the public IP address, but not on the http://192.168.0.100:80.
After restarting Yawcam, lost it on the remote computer (both public and local addresses - both with "Err! Check Host! Need signed applet), and can see on the Yawcam machine on the local address (http://192.168.0.100:80).
I was loving it until that! It's a great utility you've created.
On another computer behind my applet, I was getting the stream on the public IP address, but not on the http://192.168.0.100:80.
After restarting Yawcam, lost it on the remote computer (both public and local addresses - both with "Err! Check Host! Need signed applet), and can see on the Yawcam machine on the local address (http://192.168.0.100:80).
I was loving it until that! It's a great utility you've created.