Problems getting online with a Netgear DG834

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
raptor_flyer
Posts: 1
Joined: Wed Jun 27, 2007 7:51 pm

Problems getting online with a Netgear DG834

Post by raptor_flyer »

Has anyone experienced problems getting the Http and Stream
output visible on the web when they are using a Netgear DG834 ADSL Router?

This router supports UPNP and YawCam seems to communicate with
it OK (see Console transcript below). However, the Yawcam online check always reports Error! (see below).

I've tried changing the ports with no luck as you can see in the
console transcript.

I've also tried turning off UPNP and manually forwarding the ports
but the problem still persists.

Anyone have any ideas ?


[18:01] Yawcam started
[18:01] Settings loaded
[18:01] Language: English
[18:01] Http-output started
[18:01] Stream-output started
[18:01] UPNP: Found device Netgear Netgear DG834 Router ADSL Firewall Router
[18:01] UPNP: Found device Netgear Netgear DG834 Router ADSL Firewall Router
[18:01] UPNP: Port 8081/TCP mapped to 192.168.0.4
[18:01] UPNP: Port 8888/TCP mapped to 192.168.0.4
[18:02] Settings saved
[18:08] + 192.168.0.1
[18:09] - 192.168.0.1 (Time: 00:00:40, 1005 kB)
[18:52] Settings saved
[18:52] UPNP: Port 8081/TCP unmapped
[18:52] UPNP: Found device Netgear Netgear DG834 Router ADSL Firewall Router
[18:52] UPNP: Port 8080/TCP mapped to 192.168.0.4
[18:53] Settings saved
[18:53] UPNP: Port 8888/TCP unmapped
[18:53] UPNP: Found device Netgear Netgear DG834 Router ADSL Firewall Router
[18:53] UPNP: Port 9090/TCP mapped to 192.168.0.4
[19:02] + 192.168.0.1
[19:02] Settings saved



Yawcam online check
This page will check if your webcam is visible on Internet.


Progress:
--------------------------------------------------------------------------

Checking Http URL: http://87.113.70.197:9090 ... Error!

Checking Stream URL: http://87.113.70.197:8080 ... Error!

--------------------------------------------------------------------------
Post Reply