nothing after banner loads

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

nothing after banner loads

Postby nedr » Sat May 17, 2008 9:34 pm

installed multiple times. hash is correct. I have never gotten past banner.
I guess I need some advice.

Thanks in advance.

Advertisement



tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Sat May 17, 2008 11:42 pm

Do you have Java installed ?
Java is needed in order to run Yawcam.

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Sun May 18, 2008 3:17 am

I have JRE version 6 freshly updated too

tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Sun May 18, 2008 10:34 am

Those are the requirements to run Yawcam
Q: What are the requirements to run Yawcam?
A: Since version 0.3.0 Yawcam requires the following to start:
  • Java Runtime Environment (JRE) 6 or later.
  • DirectX 9 or later.
  • Windows Media Player 9 or later.
  • Windows 2000/XP/Vista

Wich OS do you run on your computer ?
If you have Windows Vista, did you try to run Yawcam in compatibility mode ?
  • Right-click on the Yawcam application icon on you desktop.
  • Select Properties.
  • Click the Compatibility tab.

    Image
  • Under Compatibility Mode, check the Run this in compatibility mode for checkbox and select Windows XP (Service Pack 2) from the dropdown.
  • Check the option Execute this program as an administrator
  • Click OK.
  • Dubbel click the [Yawcam application icon to start the program.
  • You will be prompted by the "Windows Vista UAC".
    Click Toestaan (Allow the installation procedure to start)

Can you take a look in the "Windows logboek / event viewer" ?
If you don't know how to do this take a l ook at my forum :

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Sun May 18, 2008 1:52 pm

I have all those requirements met running on xp, I loaded fresh java and direct x just to be sure.

is there a dirctory list I can check against or a list of dependant services needed. I may have something shut down.

tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Sun May 18, 2008 7:58 pm

Is there anything marked in the logbooks ?
Can you take a look in the "Windows logboek / event viewer" ?
If you don't know how to do this take a l ook at my forum :
Is Yawcam not started as service automaticly at start-up ?
If you want to check this ?
How to check wich application is running ?

Solutions to prevent applications from running at start-up :

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Mon May 19, 2008 5:50 pm

so the service needs to started in order to load?

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Mon May 19, 2008 6:17 pm

well now I'm getting a 1067 service error so I will try to uninstall and reinstall anew. I will let you know how it goes and thanks so far

tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Mon May 19, 2008 8:41 pm

nedr wrote:so the service needs to started in order to load?

No, sorry
Just asking if by any chance Yawcam is already started as a service during the start up of your computer and therefore prohibit a second startup.

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Mon May 19, 2008 11:10 pm

I dont shut my machine down - the service is set to manual start.

I read somewhere that there may be port sharing conflicts and/or conflicts with other video cam software.

what do you make of this servicewrapper log - I just reinstalled everything from scratch, tried to start the service and got another 1067 error.

STATUS | wrapper | 2008/05/19 17:08:06 | Yawcam installed.
STATUS | wrapper | 2008/05/19 17:08:10 | --> Wrapper Started as Service
STATUS | wrapper | 2008/05/19 17:08:10 | Launching a JVM...
INFO | jvm 1 | 2008/05/19 17:08:11 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2008/05/19 17:08:11 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
INFO | jvm 1 | 2008/05/19 17:08:11 |
INFO | jvm 1 | 2008/05/19 17:08:17 | YAWCAM - Yet Another Webcam Software
INFO | jvm 1 | 2008/05/19 17:08:17 | Arg_0: service
INFO | jvm 1 | 2008/05/19 17:08:17 | java.home: C:\Program Files\Java\jre1.6.0_06
INFO | jvm 1 | 2008/05/19 17:08:17 | Could not find: yawcam_settings.xml
INFO | jvm 1 | 2008/05/19 17:08:17 | Creating a new: yawcam_settings.xml
INFO | jvm 1 | 2008/05/19 17:08:17 | url: http://www.yawcam.com/ver.dat
INFO | jvm 1 | 2008/05/19 17:08:17 | url: http://hem.bredband.net/b418512/ver.dat
INFO | jvm 1 | 2008/05/19 17:08:17 | Resolving public IP.
INFO | jvm 1 | 2008/05/19 17:08:17 | Passwords:
INFO | jvm 1 | 2008/05/19 17:08:17 | ---------------------------------
INFO | jvm 1 | 2008/05/19 17:08:17 | ---------------------------------
INFO | jvm 1 | 2008/05/19 17:08:17 | Banned ip:
INFO | jvm 1 | 2008/05/19 17:08:17 | ---------------------------------
INFO | jvm 1 | 2008/05/19 17:08:17 | ---------------------------------
INFO | jvm 1 | 2008/05/19 17:08:17 | java.lang.UnsatisfiedLinkError: C:\Program Files\Yawcam\dsj.dll: The specified procedure could not be found
INFO | jvm 1 | 2008/05/19 17:08:17 |
INFO | jvm 1 | 2008/05/19 17:08:17 | WrapperSimpleApp: Encountered an error running main: java.lang.UnsatisfiedLinkError: de.humatic.dsj.DSEnvironment.registerDll(Ljava/lang/String;JJJ)Z
INFO | jvm 1 | 2008/05/19 17:08:17 | java.lang.UnsatisfiedLinkError: de.humatic.dsj.DSEnvironment.registerDll(Ljava/lang/String;JJJ)Z
INFO | jvm 1 | 2008/05/19 17:08:17 | at de.humatic.dsj.DSEnvironment.registerDll(Native Method)
INFO | jvm 1 | 2008/05/19 17:08:17 | at de.humatic.dsj.DSEnvironment.unlockDLL(DSEnvironment.java:346)
INFO | jvm 1 | 2008/05/19 17:08:17 | at yawcam.CamManager.<init>(CamManager.java:61)
INFO | jvm 1 | 2008/05/19 17:08:17 | at yawcam.Main.<init>(Main.java:329)
INFO | jvm 1 | 2008/05/19 17:08:17 | at yawcam.Main.main(Main.java:1586)
INFO | jvm 1 | 2008/05/19 17:08:17 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
INFO | jvm 1 | 2008/05/19 17:08:17 | at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
INFO | jvm 1 | 2008/05/19 17:08:17 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
INFO | jvm 1 | 2008/05/19 17:08:17 | at java.lang.reflect.Method.invoke(Unknown Source)
INFO | jvm 1 | 2008/05/19 17:08:17 | at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:240)
INFO | jvm 1 | 2008/05/19 17:08:17 | at java.lang.Thread.run(Unknown Source)
INFO | jvm 1 | 2008/05/19 17:08:18 | F: http://www.yawcam.com/ver.dat
INFO | jvm 1 | 2008/05/19 17:08:18 | F: http://hem.bredband.net/b418512/ver.dat
INFO | jvm 1 | 2008/05/19 17:08:18 | 0.3.0>1 == 0.3.0 -> 2
INFO | jvm 1 | 2008/05/19 17:08:18 | 71.169.171.34
STATUS | wrapper | 2008/05/19 17:08:20 | <-- Wrapper Stopped

tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Wed May 21, 2008 5:43 am

I tried to recreate the conditions you have.
I failed.
Each time i have a clear message on the screen from Yawcam or Windows telling me something is wrong.
Are you sure that :
  • You don't have a message of some kind on the screen ?
  • Yawcam isn't started, but minimzed in the system tray ?

By the way i installed not "Java Wrapper Service" but "Java Runtime Environment".
I don't know if this has something to do with it.

nedr
Posts: 7
Joined: Sat May 17, 2008 7:39 pm

Postby nedr » Wed May 21, 2008 7:51 pm

Solved *sort of*

I installled on a freshly built machine and OS and works fine. I am going to suggest the problems were with other software I was testing, plus all the garbage in the bundle. I read somewhere there may be a clash with other video detection software and that is what I think is going on here.

Thanks for all your help, it is appreciated.

If I do end up pinpointing it I will post for KB.

ok0510
Posts: 1
Joined: Wed May 28, 2008 9:01 am

Postby ok0510 » Wed May 28, 2008 9:16 am

tellmewhy wrote:Those are the requirements to run Yawcam
Q: What are the requirements to run Yawcam?
A: Since version 0.3.0 Yawcam requires the following to start:
  • Java Runtime Environment (JRE) 6 or later.
  • DirectX 9 or later.
  • Windows Media Player 9 or later.
  • Windows 2000/XP/Vista

Wich OS do you run on your computer ?
If you have Windows Vista, did you try to run Yawcam in compatibility mode ?
  • Right-click on the Yawcam application icon on you desktop.
  • Select Properties.
  • Click the Compatibility tab.

    Image
  • Under Compatibility Mode, check the Run this in compatibility mode for checkbox and select Windows XP (Service Pack 2) from the dropdown.
  • Check the option Execute this program as an administrator
  • Click OK.
  • Dubbel click the [Yawcam application icon to start the program.
  • You will be prompted by the "Windows Vista UAC".
    Click Toestaan (Allow the installation procedure to start)

Can you take a look in the "Windows logboek / event viewer" ?
If you don't know how to do this take a l ook at my forum :
I have all those requirements met running on xp, I loaded fresh java and direct x just to be sure.

is there a dirctory list I can check against or a list of dependant services needed. I may have something shut down.

eVox
Posts: 3
Joined: Sat Jul 05, 2008 12:07 am

Postby eVox » Sat Jul 05, 2008 12:11 am

I have this same problem. YAWCAM had been running fine for a month or two, and now there is nothing after the banner pop up.

tellmewhy
Posts: 425
Joined: Tue Dec 11, 2007 11:19 am

Postby tellmewhy » Sat Jul 05, 2008 11:21 am

I have a few questions for you :
  • Have you read the whole thread ?
  • Are all components needed installed and running on your computer ?
  • Did you try a fully uninstall and reinistall of the application ?
  • Is there anything in the logbooks (Windows and / or Yawcam) that indicates an error or a missing component ?
  • Wich OS do you running now ?
    (Not all OS are compatible for this application)
  • Have you upgraded your OS recently (new service pack, new operating system) ?


Return to “General”

Who is online

Users browsing this forum: No registered users and 15 guests