How to Yaw take several pictures when detect intrusion

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
linokoo
Posts: 41
Joined: Thu Mar 12, 2009 12:07 am

How to Yaw take several pictures when detect intrusion

Post by linokoo »

Hello,

I would like to know how Yawcam could take several pictures when it detect somebody.- Yawcam only take one picture and the following is after +/-10 seconds.

I have changed the "trigger" to 1 second but there is no change.

I would like that Yawcam take one or more pictures before and after detection begin & end like Contacam software but with this soft I can not arrive to put it in internet.

Thank you very much for your help.

Lino

http://lino.sytes.net:8888
chpalmer
Posts: 3
Joined: Thu Sep 01, 2016 9:28 am

Re: How to Yaw take several pictures when detect intrusion

Post by chpalmer »

Im seeing the same thing with 0.6.0 I still have a computer running 0.4.2 which works fine.

I do not have "Flood Control" enabled.
bobcam
Posts: 2
Joined: Tue Sep 20, 2016 9:26 pm

Re: How to Yaw take several pictures when detect intrusion

Post by bobcam »

Does it take several pictures, then keeps over writing the previous one ? That's what I'm seeing.
Post Reply