Router bug

[tony2012]

I setup the router with auto detect porting, and Yawcam reports it's working.

Yet it still refuses to work with streaming HTTP.

I had to plug in my USB modem key to get it to work, it refuses to work with my router, even though Yawcam reports that the porting was successful and so does my router.

This is definitely a Yawcam bug.

[z3r0c00l12]

this is definitely not a Yawcam bug, in fact the bug is in UPNP. Your router uses UPNP to "port forward" automatically, and Yawcam uses this technique to communicate to the router. Some model of routers have a poorly implemented UPNP protocol and therefore doesn't work properly. In fact, Yawcam has a good UPNP protocol which tries to deal with these flaky routers, but obviously not all can be fixed.

The best solution is to port forward manually.

Other solutions would be to try upgrading the firmware on your router or try verifying the port mapping in the UPNP log on your router.

[tony2012]

this is definitely not a Yawcam bug, in fact the bug is in UPNP. Your router uses UPNP to "port forward" automatically, and Yawcam uses this technique to communicate to the router. Some model of routers have a poorly implemented UPNP protocol and therefore doesn't work properly. In fact, Yawcam has a good UPNP protocol which tries to deal with these flaky routers, but obviously not all can be fixed.

The best solution is to port forward manually.

Other solutions would be to try upgrading the firmware on your router or try verifying the port mapping in the UPNP log on your router.

When I use my huawei E585 router your program gets confused with my HTTP IP and some other "internal IP" which WORKS, but the HTTP IP which is my proper IP, does not work!

I had to use my USB Internet modem key to bypass this bug, where it then accurately shows my proper internet IP address and then the HTTP works.

Anyway, it don't matter as I can use my USB Internet modem key to bypass this issue.

[z3r0c00l12]

Can you explain what you mean by HTTP IP being bad? This could be a problem with your router.

[tony2012]

Can you explain what you mean by HTTP IP being bad? This could be a problem with your router.

Where did I say HTTP IP being bad?

[z3r0c00l12]

I thought something being confused was bad, is it not?

[malun]

I'm sorry tony2012, but you are giving us to little information to be able to help you.
As z3r0c00l12 says UPNP can sometimes be a bit tricky to get working and if you run into problems with it you are recommended to forward the ports manually.

/malun

[p8trick]

I have everything in the right fields and it still is not letting me email motion photos to my gmail account. Am I doing something wrong or is it a bug. here is what everything looks like

[p8trick]

Here is the message that i am getting. i am worried about the message in red

[z3r0c00l12]

From your messages I can't tell if it's a normal behavior or not, can you repost your pictures on another website, they were deleted before I could see them.

[p8trick]

Here you go. Sorry about that. Thank you for your help.