Multi Burst Images?

adamtrons · Post by **adamtrons** » Fri Apr 01, 2011 6:13 pm

First I want to say I love Yawcam and I'm so greatful that it's a free software. It has been working well for me. But one issue I have is that I want it to take more photos when it detects movement. Right now if a person walks into the room, stays for a minute or two and then exits, I may get only 1 or 2 photos. I'm wondering if there is a way to have it detect motion and then start capturing images every second? Or tell it to automatically take 20 photos when it detects movement (basically a "multi burst" like you have on a camera). I currently have the sensitivity set to 90% and tolerance 4% and interval 125 ms. I set output file to 1 second under settings although I'm not sure if this works when using the email function? Thank you for your time!

Post by **z3r0c00l12** » Sat Apr 02, 2011 4:24 am

Use the image array in the motion detection, you can specify time intervals as low as 100ms between your pictures if you want.

Information here.

adamtrons · Post by **adamtrons** » Sat Apr 02, 2011 4:34 am

Thank you for the information z3r0c00l12. I will try that!