a.k.a The new Tiscali Wireless Modem/Router things.
I have added the port forwarding in manually, I have done it using UPnP, I have added the computer as a DMZ host, but I STILL cant see the cam externally (working fine internally). I also have the router firewall turned off and tried turning off windows firewall on the host computer to no affect
I can view my router Web UI from the public IP (port 80) but any other port I try to access just gives me 'Page cannot be displayed' (404)
UPnP is happily mapping ports as you can see form this:
[14:07] UPNP: Found device Siemens Siemens UPnP IGD in ISOS v1.00.17 IGD
[14:07] UPNP: Port 8082/TCP mapped to 192.168.1.4
[14:07] UPNP: Found device Siemens Siemens UPnP IGD in ISOS v1.00.17 IGD
[14:07] UPNP: Port 8888/TCP mapped to 192.168.1.4
[14:07] + 192.168.1.4
[14:08] Settings saved
[14:08] - 192.168.1.4 (Time: 00:00:40, 137 kB)
[14:15] GET: /index.html
[14:15] GET: /out.jpg
[14:15] GET: /favicon.ico
[14:15] Error 404
[14:27] Http-output stopped
[14:27] UPNP: Port 8888/TCP unmapped
[14:27] Settings saved
[14:27] Http-output started
[14:27] UPNP: Found device Siemens Siemens UPnP IGD in ISOS v1.00.17 IGD
[14:27] UPNP: Port 80/TCP mapped to 192.168.1.4
[14:28] Http-output stopped
[14:28] UPNP: Port 80/TCP unmapped
[14:28] Settings saved
[14:28] Http-output started
[14:28] UPNP: Found device Siemens Siemens UPnP IGD in ISOS v1.00.17 IGD
[14:28] UPNP: Port 8080/TCP mapped to 192.168.1.4
But it still doesnt work.
Any suggestions would be greatly appreciated, this is getting so frustrating!
Cheers