Suddenly getting Yawcam/FTP errors on 3 PC's
Posted: Mon Feb 09, 2009 10:56 am
Hi
I am running Yawcam as a "simple FTP upload program" (no video streaming etc) however using an 48 image array of the last 48 images (24 hours).
Furthermore I am running this on 4 different PC's and have been doing so for almost 2 years. Suddenly... on 3 of the 4 PC's I am starting to get FTP error messages:
"[09:11] Ftp error: Software caused connection abort: socket write error"
I can also see that a high percentage of the images gets only partially uploaded or not uploaded at all. The 3 PC's in question have all been rebooted without this helping.
All 4 PC's are located in the same LAN in my vacation house. 2 of the PC's are connected with cable in a 100mbps net and 2 PC's have a WLAN connection. Only on 1 of the 2 PC's with cable connection is now Yawcam still working properly.
I am running Yawcam Version 0.2.6>7 built: 2007-03-03 on four Pentium 4 PC's with 1GB or more RAM and using 3 Creative Live Motion Webcams and 1 Philips webcam. Only one PC with a Creative Live Motion Webcams have now a fully operational Yawcam. All four PC's are uploading to one of my websites and I have checked with the webhotel company that I have not run into limits by them.
As I already have metioned I have tried rebooting the PC's, updating Java and downgrading Java - no success.
HELP ! ...any suggestions?
I am running Yawcam as a "simple FTP upload program" (no video streaming etc) however using an 48 image array of the last 48 images (24 hours).
Furthermore I am running this on 4 different PC's and have been doing so for almost 2 years. Suddenly... on 3 of the 4 PC's I am starting to get FTP error messages:
"[09:11] Ftp error: Software caused connection abort: socket write error"
I can also see that a high percentage of the images gets only partially uploaded or not uploaded at all. The 3 PC's in question have all been rebooted without this helping.
All 4 PC's are located in the same LAN in my vacation house. 2 of the PC's are connected with cable in a 100mbps net and 2 PC's have a WLAN connection. Only on 1 of the 2 PC's with cable connection is now Yawcam still working properly.
I am running Yawcam Version 0.2.6>7 built: 2007-03-03 on four Pentium 4 PC's with 1GB or more RAM and using 3 Creative Live Motion Webcams and 1 Philips webcam. Only one PC with a Creative Live Motion Webcams have now a fully operational Yawcam. All four PC's are uploading to one of my websites and I have checked with the webhotel company that I have not run into limits by them.
As I already have metioned I have tried rebooting the PC's, updating Java and downgrading Java - no success.
HELP ! ...any suggestions?