pc in the same network can see me , but outside cant

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
Posts: 2
Joined: Mon Mar 14, 2011 6:12 pm

pc in the same network can see me , but outside cant

Post by mido2man » Fri Mar 18, 2011 4:24 am

i do video Stream , but pc in my network ( the same router ) only can see me , but other pc out side my network ( not the same router )cant see me , why ? and how i fix it ?


Posts: 1210
Joined: Wed Jan 14, 2009 3:50 am

Post by z3r0c00l12 » Fri Mar 18, 2011 12:50 pm

Can you make a little picture of how you are connected, are your routers plugged together or over the internet?

for example:

Internet --------- Router ---------- Your PC
\-------Other Router---------- Other PC

If this is the case and Yawcam is running on your PC, you may want to use your other router as a switch rather then a router, or you may have a configuration problem where your router can't route to the internal network of your Other Router.

Posts: 39
Joined: Thu Feb 04, 2010 2:40 pm

Post by bben95 » Thu Mar 24, 2011 11:40 pm

this sounds like a port forwarding issue to me. Use portforward.com to help you set up the right port/s from the computer you run yawcam on to the internet. Also, you will need to make sure your computer has a static ip address.

Post Reply