Motion Detection will not send email

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
Vince
Posts: 6
Joined: Tue Aug 07, 2012 7:19 pm

Motion Detection will not send email

Post by Vince »

Running XP via ATT Uverse. IPcam on a Driod. Everything else works, inside/outside network. With both a webcam and IP camera.

I can not get it to send an email upon motion detection. I have tried 3 functioning email address, 1 ATT and 2 Gmail account. No Luck.

using smtp.gamil.com
Port 465
SSL required
Password required
Image Array unchecked
Flood Control a 1 every 10 seconds.

Any suggestions?
memoric
Posts: 184
Joined: Wed Feb 23, 2011 1:37 pm

Post by memoric »

Is that "smtp.gamil.com" a copy/paste from your settings or you wrote it "by
hand"? If it's the first, then your settings are wrong. The right one is "gmail".
Vince
Posts: 6
Joined: Tue Aug 07, 2012 7:19 pm

Ok I got it working.

Post by Vince »

You can not send an email to yourself.
I sent the email to a different email account, in my case an ATT email that is handled by yahoo.

The from address is my gmail(spelled correctly) with it's smtp info.
Port 25; SSL required as well as password.

I knew it had to be simple.
Post Reply