Page 1 of 1

How to Yaw take several pictures when detect intrusion

Posted: Sun Jul 24, 2016 12:29 am
by linokoo
Hello,

I would like to know how Yawcam could take several pictures when it detect somebody.- Yawcam only take one picture and the following is after +/-10 seconds.

I have changed the "trigger" to 1 second but there is no change.

I would like that Yawcam take one or more pictures before and after detection begin & end like Contacam software but with this soft I can not arrive to put it in internet.

Thank you very much for your help.

Lino

http://lino.sytes.net:8888

Re: How to Yaw take several pictures when detect intrusion

Posted: Thu Sep 01, 2016 9:35 am
by chpalmer
Im seeing the same thing with 0.6.0 I still have a computer running 0.4.2 which works fine.

I do not have "Flood Control" enabled.

Re: How to Yaw take several pictures when detect intrusion

Posted: Fri Sep 23, 2016 1:07 am
by bobcam
Does it take several pictures, then keeps over writing the previous one ? That's what I'm seeing.